All our prices shown include VAT - at 20%
Delivery From As Little As £7.99 Per Order
Delivery Is Free On Orders Over £150



Ultra Tile Readymix Waterproof WR White Wall Tile Adhesive 16 KG

Ultra Tile Readymix Waterproof WR White Wall Tile Adhesive 16 KG
R.R.P: £27.44
Brand:Ultra Tile
Product Code: SUPWHWR15G
Reward Points: 19
Availability: In Stock
Price: £23.99
Ex Vat: £19.99
Price in reward points: 1999

Make an offer

If you like the product you see but it's a little out of your
budget then you can make us and offer below.
Alternatively feel free to call on 01626 776606 for a custom quote.


* Denotes a required field

Make an offer
Qty:  Add to Cart
   - OR -   
Sold By The:Unit

Packaging: 16kg, 8kg plastic buckets
Standard: BS 5980 Class AA
Conformities: EN12004 D2T
Bed Thickness: 3mm using notched trowel
Coverage: 1.8kg per m2
Open Time: 20 minutes depending upon temperature
and substrate
Adjustment Time: 20 minutes depending upon temperature
and substrate
Set Time: 24 hours depending upon temperature
and substrate
Storage: In unopened buckets in dry, frost free
environment out of direct sunlight.
Shelf Life: 6 months in the above conditions

Ultra WaterProof WR is a ready mixed thin bed wall tile adhesive suitable for
interior use. Specially formulated to provide increased water resistance, the
product is suitable for areas with constant wetting, i.e. changing rooms,
showers, kitchens and bathrooms.
Conforming to BS 5980 Type 2 Class AA, EN 12004 D2T, Ultra WaterProof WR’s
unique properties are ideal for fixing porcelain mosaics, glass and natural stone
to most common building substrates. The product contains an anti-fungal
additive, which prevents the build up of mould. It is not recommended for
exterior use or areas subjected to immersion such as swimming pools.
Note: When using larger format non-porous tiles like porcelains drying times will
be substantially increased. In these instances we would recommend the use of
a cementitious adhesive.

 Notched Trowel

Ensure all areas are clean, dry and free from dust or any other contaminating
barriers. Remove any flaking or peeling layers.

Plaster: Tile only onto a finished coat. Leave new plaster for at least 4 weeks in
order that it will be strong enough to support the tiling weight.
Cement/Sand Render: Leave new surfaces to dry out for at least 2 weeks
before tiling.
Brickwork/Concrete: Leave new surfaces to dry out for at least 4 weeks.
Plasterboard/Fibre Reinforced Cement Sheets: Boards should be braced and
screwed horizontally and vertically at 300mm centres.
Domestic Showers: Ensure 100% solid bed coverage is achieved.
Do not leave voids when applying the material as this will trap water and cause
adhesive failure.

Apply adhesive to the surface by use of a notched trowel. Bed tiles in firmly with
a slight twisting action. Clean off excess adhesive from the tile face with a damp
cloth and rake excess from the grout lines before it sets. Leave for a minimum
of 24 hours before grouting (on impervious or sealed surfaces longer time will
be required).
Note: All tiling should follow the correct British/European Standard and
incorporate movement joints therein.

Tools should be thoroughly cleaned in water to remove excess materials
immediately after use.

Product Specification
Tiles Per Box0
Tiles Per SQM0
Sold PerUnit
Tile InfoWall Adhesive

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating:Bad            Good

Enter the code in the box below:


 © Copyright Tile Supply Ltd (Reg.No.6872665 - VAT No.111 0409 84) 2009 - 2014 All rights reserved