All our prices shown include VAT - at 20%
Delivery From As Little As £7.99 Per Order
Delivery Is Free On Orders Over £150



Ultra Tile Pro Grey Flexible Fastset Powder Adhesive 56 Bags

Ultra Tile Pro Grey Flexible Fastset Powder Adhesive 56 Bags
R.R.P: £1,820.86
Brand:Ultra Tile
Product Code: PD-VT100445
Reward Points: 667
Availability: In Stock
Price: £801.12
Ex Vat: £667.60
Price in reward points: 66760

Make an offer

If you like the product you see but it's a little out of your
budget then you can make us and offer below.
Alternatively feel free to call on 01626 776606 for a custom quote.


* Denotes a required field

Make an offer
Qty:  Add to Cart
   - OR -   
Sold By The:Pallet

Packaging: 20kg, 10kg, 5kg – triple walled paper bags.
Standard Conformity: Conforms to the requirements of EN12004
Class: C2F S1.
Bed Thickness & Coverage: 1-20mm. At 3mm bed thickness you will
require 4.5kg material per m2.
Open Time: 20 minutes depending upon temperature
and substrate.
Set Time: 2-3 hours depending on temperature and

Storage: This product must be stored in unopened
bags, clear of the ground in cool dry
conditions and protected from excessive
drafts. If stored correctly and used within
6 months of the date shown on the bag,
the activity of the reducing agent will be
maintained and this product will contain,
no more than 0.0002% (2ppm) soluble
Chromium (VI) of the total dry weight of
the cement.

Shelf Life: 6 months in above conditions. Please note:
The use of this product after the end of the
declared storage period may increase the
risk of an allergic reaction. High
temperatures and high humidity will lead to
a reduced shelf life.

Colour: 20kg bags Grey and White.
5kg & 10kg bags Grey only.
Note: All tiling should follow the correct
British/European standard, and incorporate
movement joints as specified therein.

Ultra ProFlex SP is a single part, rapid set, polymer modified, cementitious wall
and floor tile adhesive. Specially formulated to achieve enhanced adhesion and
flexibility, it is ideal for areas where slight movement or vibration can occur. The
adhesive’s unique qualities make it suitable for fixing glass, porcelain, mosaic
and ceramic tiles to most common building substrates, including concrete/sand
render, screeds, brick and block work, heated sub floors, existing tiled surfaces
and screwed and fixed over boarded wooden floors. Ultra ProFlex SP is perfect
for both interior, exterior, wet and dry conditions, making it ideal for communal
showers and swimming pools. It will take light foot traffic within 3 hours of
application dependent upon temperature and substrate.

The tiling surface must be clean, firm, dry, free of dust, dirt, oil and grease,
and be strong enough to support the weight of the adhesive and tiles being
fixed. When tiling onto timber flooring ensure that the boards are dry (i.e.
conditioned to the environment in which they will be used), rigidly fixed,
ventilated beneath and free from barriers to adhesion. All plywood and flooring
grade chipboard should have backs and edges sealed to prevent ingress of
moisture and atmospheric humidity; the face to be tiled should be sealed with
Ultra Flexi-Prime and left to dry prior to fixing. Boards should be 18mm thick
and screwed down to the joists at 300mm centres or less. In all cases, the
timber surface to be tiled should be adequately stable, strong and suitably rigid,
enough to withstand the loads without deflection.

Ultra ProFlex SP should be added slowly to clean water (20kg White: 4.8 litres
of water; 20kg Grey: 4.4 litres of water) and mixed thoroughly to give a slump
free, easily worked mortar. Once mixed, the mortar is ready for use immediately
and has a working time of approximately 20 minutes at a temperature of 20°C.
Mix only sufficient material to be used within the working time; do not remix or

Apply the adhesive to a thickness of 3mm-20mm up to 1m2 in one pass. On
interior walls use a notched trowel leaving solid ribs, i.e. 3mm x 3mm at 6mm
centres for mosaics, 5mm x 5mm at 10mm centres for wall tiles, and 8mm x
8mm at 16mm centres for floor tiles. On floors and external areas use the solid
bed trowel method. Large studded tiles may also need to be ‘buttered’ with
adhesive. Bed the tiles in with a slight twisting action. Leave spaces between
the tiles for grouting (approximately 1mm-3mm for walls and 2mm-20mm for
floors). Clean off excess adhesive from the tile face and grout lines with a damp
cloth before it sets.

Tools should be thoroughly cleaned in water to remove excess materials
immediately after use.

Leave for a minimum of 3 hours before grouting and/or walking on the tile. This
time may be extended on impervious surfaces. Check set before grouting –
Instarmac’s technical team will be happy to suggest the best Ultra grout for
ultimate performance.

Ultra ProFlex SP is a single part, rapid set wall and floor tile adhesive. Suitable
for heavily trafficked areas. Ideal for applications where movement and vibration
is likely, such as over-boarded wooden floors and floors with under floor heating.
Also suitable for areas such as communal showers and swimming pools, for use
with Porcelain, Ceramic, Natural Stone, Mosaic Wall and Floor tiles.

Product Specification
Tiles Per Box0
Tiles Per SQM0
Sold PerPallet
Tile InfoWall and Floor Tile Adhesive

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating:Bad            Good

Enter the code in the box below:

 © Copyright Tile Supply Ltd (Reg.No.6872665 - VAT No.111 0409 84) 2009 - 2014 All rights reserved